Performers 2019


Haithem Jeridi

ASM

Title:
The new standard for smart factory

Komáromi Zoltán

Audi

Title:
Increasing Challenges of Electrical Vehicle Analysis
Introduction:
He was born in 1982 in Győr, married to 3 children. He graduated in 2007 as an electrical engineer at the Budapest University of Technology. From 2007 to 2011, he worked as a HW / SW developer for embedded systems. From 2011, he started working as an analytical engineer at AUDI Hungaria Zrt. Between 2014 and 2016, he worked at the Audi center in Ingolstadt as a resident of the factory in Győr to deal with the problems faced by the customer cars. In 2016 he returned to Győr, where he is currently the professional coordinator of the analysis group for vehicle electronics.

Lázár Edit

Auter

Title:
The new standard for smart factory
Introduction:
IPC-Hermes is now the only globally accepted and broadly established standard for machine to machine communication. All electronics manufacturers will strongly benefit from this new level of standardization progress.Obstacles with regards to implementing “smart factory” features will be dramatically reduced or removed.See how this new standard enables you to implement new possibilities in your factory.

Jaroslav Neuhauser

ATT

Title:
3D Inspection in Smart Factory
Introduction:
– responsible for application / service team operating in EMEA region SPI/AOI/AXI investment equipment technical sales in EMEA region coordinating European software development team esponsible for 3D SPI and 3D AOI development leading global technical evaluations at key customers.

Dr. Kazi Károly

BHE Bonn Hungary Ltd.

Title:
Detection and protection of malicious or irresponsible drone usage
Introduction:
He was born in 1955 in Kiskunhalas. He graduated in 1980 from the Microwave Department of the Electrical Engineering Faculty of the Budapest University of Technology and then received his doctorate from the Hungarian Academy of Sciences in 1986. Between 1990 and 1992 he worked in Japan at the Yokogawa Electric Co. high Frequency Research Laboratory. After returning home, he continued his work in MFKI and then joined BHE Bonn Hungary Ltd. in 1993. He was the first technical director of the company, and since 1996 he has been managing director. BME Academic Associate Professor, author or co-author of more than 60 publications, owner of 11 patents, co-author of 3 books. He is winner of the Dennis Gabor Award, president of Hungarian Electronics Society (MELT), he is Senior Member of the IEEE, silver awarded member of the HTE, and he is a member of the MISZ and the Innovation Advisory Board of the Óbuda University.

Dr. Harsányi Gábor

BME

Title:
Automotive electronics, reliability, safety
Introduction:
He finished as electrical engineer at BME in 1981, received his PhD in 1992, and DSc of the Hungarian Academy of Sciences in 2001. He started his career at the Microelectronics Company (MEV) and continued working at the Department of Electronics Technology, Budapest University of Technology and Economics. He has been the head of department since 2003 as full professor.

Godó Attila

D és Tsa.

Title:
Importance to the ESD shoes in the electronic manufacturing – maintenance and test in the production
Introduction:
My name is Attila Godó, 43 years old. I am the founder and managing director of AIJ-GO Engeenering Ltd. and GOd-MIN Engeenering Ltd. I have worked in electrostatic protection ESD for 20 years. I started to work with electrostatic protection in IBM Székesfehérvár during the HDD production. I used my ESD knowledge in Sanmina-Sci Tatabánya from 1999 to 2006 than ESD coordinator. I have managed the GOD-MIN Engeenering Ltd. since 2007. The ESD LABORATORY, ACADEMY and SYSTEM departments make ESD laboratory tests, ESD educations and ESD audits according to IEC 61340-5-1:2016 and ANSI/ESD S20.20_2014 ESD standards. In parallel I have managed the AIJGO ESD SERVICE department since 2009 which makes ESD research and developing. We have developed more than 100 products for the domestic and export markets which are sold by D és Tsa. Bt. These products are sold in more than 30 countries. We help more than 200 companies in Central and Eastern Europe for EOS/ESD/EMI fields. We can make all ESD tests and ESD product certification in our ESD laboratory in Tatabánya according to the valid ESD standards. We help the manufacturers of ESD products in the developing, testing of ESD products.

Bődi Béla

Elas Kft.

Title:
Selective welding in everyday use
Introduction:
Bela Bodi graduated as a Mechanical and Automotive Engineer (BA) at the Széchenyi István College in Győr in 1995. In addition to these, he received another degree in Mechanical Engineering (MA) in 2000 and a further degree in Quality & Production Management (BA), at the Budapest University of Technology and Economics in 2006. Initially in 1999 Bela worked a Process Engineer at Delphi Hungary Kft, before moving on to work with his current company Elas Kft the following year. Bela is now Application and Training Manager at Elas, a position he took up in 2010. He is also a fully qualified IPC Master Trainer and an instructor at Selectiv Soldering Academy, USA (in Hungary). Bela is also a Creative Editor at Autotechnics Magazine and a guest speaker at István Széchenyi and Óbuda Universities.

Tom Berx

ERSA GmbH

Title:
How to use digital solutions – Do not fear of artificial Intelligence!
Introduction:
Tom Berx, Area Sales Manager, Ersa GmbH
Since 2006 Tom Berx has worked as key account manager for Ersa. He is responsible for the sales to some of the most important markets in Europe. In close cooperation with our local sales representatives like Microsolder in Hungary, Tom Berx supports the sales and folluw-up of our premium and high-performance reflow, selective and wave soldering systems as well as screen printers on site at the customer’s. His process expertise is highly acknowledged, as is his extensive experience in total production solutions. Tom Berx has over 20 years of experience in the sales of machines and systems for the electronics production industry.

Jónás Tamás

Flextronic

Title:
Scheduling stochastic production processes with genetic and hybrid algorithms
Introduction:
Tamás Jónás is a research fellow at Flex Budapest and a part time associate professor at the Institute of Business Economics, Eötvös Loránd University, Budapest, Hungary. He received a BSc degree in engineering informatics from College of Mechanical Engineering and Automation, Kecskemét, Hungary, in 1993, an MSc degree in computer science from University of Szeged, Hungary, in 2001 and a PhD degree in business economics from the Budapest University of Technology and Economics, Hungary, in 2011. His research interests include application of soft computational methods in business process modeling and simulation. He is co-author of two books, 4 book chapters and more than 60 journal and conference papers. He teaches applied quantitative methods, fuzzy theory and reliability theory.

Václáv Haasz

HTEST

Title:
Solutions for testing of EV and HEV and surrounding infrastructure
Introduction:
Managing director – owner of H TEST a.s. group (the authorized distributor of Keysight Technologies in Czechia, Slovakia, Austria and Hungary

Patrick J. Duchi

Inventec

Title:
Cleaning in Electronics: new challenges in lead free assemblies
Introduction:
Patrick J. Duchi, PhD chemist engineer, began his career as an R&D Engineer by Du Pont de Nemours Switzerland. He worked for many different departments by Du Pont for 10 years, and worked for 3 years by Union Carbide, at R&D research center on silicone formulations.
In the cleaning business for more than 32 years and at least 22 years by Inventec Performance Chemicals, He innovated by developing the co-solvent and drying formulations and the cleaning processes which are now worldwide used as substitutes to CFC’s, HCFC’s, Perchlorethylene, Trichloethylene, chlorinated solvents, AK225, nPb and others. He developed the business worldwide for over 4 years, as WW BU director and for 17 years as swiss director. Today, He is contributing to the development of the Inventec Performance Chemicals international sister companies and distributors, as Worldwide Senior cleaning expert.

Herczeg István

Messer Hungarogáz Kft.

Title:
Nitrogen supply solutions in electronics. How to determine the most optimal gas supply mode based on quantitative and qualitative industry-specific requirements?
Introduction:
Application engineering engineer – electronics and chemical applications. In addition to industrial gas applications, the main goal is to support the application of industrial gas for domestic electronics component manufacturing companies. In particular, the application of industrial gases in the field of soldering and component storage – development, installation, installation of instrumentation, soldering atmosphere, instrumental consultations, training of operating personnel. Effective use of liquefied industrial gases – optimization of residual oxygen levels, optimization of gas temperature and utilization of the cold energy content of liquefied gases.

Paul Wild

Rehm Group

Title:
Soldering processes – Applications and trends
Introduction:
Paul Wild studied Aerospace Engineering at the University of Stuttgart. After graduation, he worked as a research assistant at the HSG-IMAT. His special field of work was the reliability analysis of mechatronic systems, especially based on MID technology. Since 2014 he works in the research and development department of Rehm Thermal Systems. He is responsible for the new and further development of thermal systems as well as technological cooperation with institutes and companies, especially in the field of convection soldering.

Herczeg Zoltán

Rohde-Schwarz

Title:
5 generation Mobile Network, New Challenges for Automotive Electronics and Industry!
Introduction:
In 1991 he graduated from the Bolyai János Military Technical College.

Helge Höche

Viscom AG

Title:
Nothing remains hidden!
Introduction:
Helge Höche is responsible for the international sales of Viscom’s manual & automatic X-ray inspection solutions. Before, he worked successfully for the GE Sensing & Inspection Technologies GmbH for more than 15 years, among other things, as service engineer for X-ray systems. Customers benefit from his years of practical experience in the electronics industries, technical expertise and solution-oriented consulting.

Zsikla Miklós

Computer Controls Hungary Ltd.

Title:
Easy, responsive and modern solution for hardware development
Introduction:
He has been an electrical engineer at BME for 8 years, responsible for Computer Controls Hungary design software business, and since 2016 has been managing the company. He is passionate about electronics development, has held many courses and lectures on hardware design and testing.

Litkei Márton András

National Instrument

Title:
Tackling the Test Challenges of Next Generation ADAS Vehicle Architectures
Introduction:
Providing solutions for automotive companies addressing manufacturing and R&D challenges for more than 10 years. With an engineering and sales background my goal is not only to achieve high technical quality but to provide a solution that is perfectly aligned with my customer’s business model and processes.

Uzdi István

National Instrument

Title:
Real-Time Machine Monitoring at National Instruments Manufacturing with NI HW & SW solutions
Introduction:
I am working for NI Hungary company 15 years. I started as trainee than fork as process engineer. My main areas were printing, reflow soldering, wave soldering, selective soldering and cleaning technology My daily task were production support and improvement, New product implementation and new technology implementation. 3 years I am in process manager role and have family with 3 kids.

Jens Gruse

Stannol GmbH / Microsolder

Title:
How to select the right solder wire for your application?
Introduction:
Year of birth: 1962
Academic title: Certified chemical engineer
Current field of activity
– Technical application support for major customers in the field of electronic manufacturing and process materials: Solder pastes, fluxes, solder wires, lead-free and lead-containing alloys and soldering agents
Previous activities in other companies/institutes:
– Technical product manager of the SMD solder pastes product line
– Sales technician for alcohol-based and VOC-free fluxes, SMD solder pastes, solder wire
– Application technology/distribution: Demonstrations, sales, maintenance and repairs of the entire program of measuring instruments: Micro wetting balance, contamination, temperature profile measuring instruments
– Chemical engineer: Development of solder pastes and fluxes for wave soldering, metallurgical and wet-chemical analytics, application of general measurement methods from soldering technology.
Other activities: Active participation for approx. 10 years in the “Gesellschaft für Korrosionsschutz” (GfKorr, Working Group Electronics Protection)

Julian Studer

LORIOT

Title:
LORIOT – Ipari IoT middleware

Torsten Lessnau

Monolithic Power Systems (MPS)

Title:
Modern Solutions of swithced-mode power supplies

Fábián Zoltán

IFKA

Title:
Efficiency Development and Industry 4.0

Hegedűs Szilveszter

IFKA

Title:
The much-mentioned industry 4.0

Kolinger Attila

Microchip / ChipCAD

Title:
How to achieve data security in embedded systems?Solutions by Trust Zone ATSAML11 microcontrollers and MPU/SiP processors
Berky Tibor

ChipCAD

Title:
Quectel – the leader in 4G IoT modul manufacturing – NB-IoT, Cat-M
Alwyn Botha

Endric

Title:
Capacitive sensor technology for applications verified by design
Introduction:
Product Manager Azoteq (Pty) Ltd – South Africa
Ian Doyle B. Eng

Endrich

Title:
Designing Electronic Systems for Circuit Protection Compliance & Robustness
Introduction:
Director Sales & Marketing EMEA ProTek Devices USA
Georg P. Israel

Endrich

Title:
Smart displays and panel PCs from DLOGIC
Introduction:
Dlogic EUROPE gmbh
Belovai Beáta

Endrich

Title:
Low Power Wide Area (LPWA) Technologies and Narrow Band IoT (NB-IoT)
Introduction:
IoT / NB IoT Solution Sales T-Systems Hungary ZRT.
Kiss Zoltán

Endrich

Title:
Practical Usage of NB-IoT Technology – FiboCom Cat NB / Cat-M and GPRS Modems for Sensor Data Transfer
Introduction:
Export Director Endrich Bauelemente Vertriebs GMBH.
David De Somviele

Interelectronic

Title:
LMPA – Low melting point alloy
Introduction:
32 years,
degree in communication management,
6 years internal sales at Arcelor Mittal,
3 years international sales manager at Interflux Electronics
Varga Zsigmond

Kapacitás Kft.

Title:
Energy storage systems for the future
Introduction:
Since 2009 he has been working as an engineer salesman for Rohde & Schwarz.
Blajec Edgár

Danutek Hungary Kft.

Title:
Intelligent materials management solutions for the electronics industry